root / proj / src / uart.c @ 272
History | View | Annotate | Download (14.5 KB)
| 1 | 235 | up20180642 | #include <lcom/lcf.h> |
|---|---|---|---|
| 2 | |||
| 3 | #include "uart.h" |
||
| 4 | |||
| 5 | #include "errors.h" |
||
| 6 | |||
| 7 | 249 | up20180642 | #define UART_BITRATE 115200 |
| 8 | #define UART_WAIT 20 //microseconds |
||
| 9 | 241 | up20180642 | |
| 10 | 249 | up20180642 | #define UART_RBR 0 |
| 11 | #define UART_THR 0 |
||
| 12 | #define UART_IER 1 |
||
| 13 | #define UART_IIR 2 |
||
| 14 | #define UART_FCR 2 |
||
| 15 | #define UART_LCR 3 |
||
| 16 | #define UART_MCR 4 |
||
| 17 | #define UART_LSR 5 |
||
| 18 | #define UART_MSR 6 |
||
| 19 | #define UART_SR 7 |
||
| 20 | 241 | up20180642 | |
| 21 | 249 | up20180642 | #define UART_DLL 0 |
| 22 | #define UART_DLM 1 |
||
| 23 | 241 | up20180642 | |
| 24 | 249 | up20180642 | /// LCR
|
| 25 | #define UART_BITS_PER_CHAR_POS 0 |
||
| 26 | #define UART_STOP_BITS_POS 2 |
||
| 27 | #define UART_PARITY_POS 3 |
||
| 28 | #define UART_BREAK_CONTROL_POS 6 |
||
| 29 | #define UART_DLAB_POS 7 |
||
| 30 | 241 | up20180642 | |
| 31 | 249 | up20180642 | #define UART_BITS_PER_CHAR (BIT(0) | BIT(1)) |
| 32 | #define UART_STOP_BITS (BIT(2)) |
||
| 33 | #define UART_PARITY (BIT(3) | BIT(4) | BIT(5)) |
||
| 34 | #define UART_BREAK_CONTROL (BIT(6)) |
||
| 35 | #define UART_DLAB (BIT(7)) |
||
| 36 | 241 | up20180642 | |
| 37 | 249 | up20180642 | #define UART_GET_BITS_PER_CHAR(n) (((n)&UART_BITS_PER_CHAR) + 5) |
| 38 | #define UART_GET_STOP_BITS(n) (((n)&UART_STOP_BITS)? 2 : 1) |
||
| 39 | #define UART_GET_PARITY(n) (((n)&UART_PARITY )>>UART_PARITY_POS )
|
||
| 40 | #define UART_GET_BREAK_CONTROL(n) (((n)&UART_BREAK_CONTROL)>>UART_BREAK_CONTROL_POS)
|
||
| 41 | #define UART_GET_DLAB(n) (((n)&UART_DLAB )>>UART_DLAB_POS )
|
||
| 42 | #define UART_GET_DIV_LATCH(m,l) ((m)<<8 | (l)) |
||
| 43 | #define UART_GET_DLL(n) ((n)&0xFF) |
||
| 44 | #define UART_GET_DLM(n) (((n)>>8)&0xFF) |
||
| 45 | 242 | up20180642 | |
| 46 | 249 | up20180642 | /// IER
|
| 47 | 252 | up20180642 | #define UART_INT_EN_RX_POS 0 |
| 48 | #define UART_INT_EN_TX_POS 1 |
||
| 49 | 249 | up20180642 | #define UART_INT_EN_RECEIVER_LINE_STAT_POS 2 |
| 50 | #define UART_INT_EN_MODEM_STAT_POS 3 |
||
| 51 | 242 | up20180642 | |
| 52 | 252 | up20180642 | #define UART_INT_EN_RX (BIT(0)) |
| 53 | #define UART_INT_EN_TX (BIT(1)) |
||
| 54 | 249 | up20180642 | #define UART_INT_EN_RECEIVER_LINE_STAT (BIT(2)) |
| 55 | #define UART_INT_EN_MODEM_STAT (BIT(3)) |
||
| 56 | 242 | up20180642 | |
| 57 | 252 | up20180642 | #define UART_GET_INT_EN_RX(n) (((n)&UART_INT_EN_RX )>>UART_INT_EN_RX_POS )
|
| 58 | #define UART_GET_INT_EN_TX(n) (((n)&UART_INT_EN_TX )>>UART_INT_EN_TX_POS )
|
||
| 59 | #define UART_GET_INT_EN_RECEIVER_LINE_STAT(n) (((n)&UART_INT_EN_RECEIVER_LINE_STAT)>>UART_INT_EN_RECEIVER_LINE_STAT_POS)
|
||
| 60 | #define UART_GET_INT_EN_MODEM_STAT(n) (((n)&UART_INT_EN_MODEM_STAT )>>UART_INT_EN_MODEM_STAT_POS )
|
||
| 61 | 249 | up20180642 | |
| 62 | /// LSR
|
||
| 63 | #define UART_RECEIVER_READY_POS 0 |
||
| 64 | 261 | up20180642 | #define UART_OVERRUN_ERROR_POS 1 |
| 65 | #define UART_PARITY_ERROR_POS 2 |
||
| 66 | #define UART_FRAMING_ERROR_POS 3 |
||
| 67 | 249 | up20180642 | #define UART_TRANSMITTER_EMPTY_POS 5 |
| 68 | |||
| 69 | #define UART_RECEIVER_READY (BIT(0)) |
||
| 70 | 261 | up20180642 | #define UART_OVERRUN_ERROR (BIT(1)) |
| 71 | #define UART_PARITY_ERROR (BIT(2)) |
||
| 72 | #define UART_FRAMING_ERROR (BIT(3)) |
||
| 73 | 249 | up20180642 | #define UART_TRANSMITTER_EMPTY (BIT(5)) |
| 74 | |||
| 75 | #define UART_GET_RECEIVER_READY(n) (((n)&UART_RECEIVER_READY )>>UART_RECEIVER_READY_POS )
|
||
| 76 | 261 | up20180642 | #define UART_GET_OVERRUN_ERROR (((n)&UART_OVERRUN_ERROR )>>UART_OVERRUN_ERROR_POS )
|
| 77 | #define UART_GET_PARITY_ERROR (((n)&UART_PARITY_ERROR )>>UART_PARITY_ERROR_POS )
|
||
| 78 | #define UART_GET_FRAMING_ERROR (((n)&UART_FRAMING_ERROR )>>UART_FRAMING_ERROR_POS )
|
||
| 79 | 249 | up20180642 | #define UART_GET_TRANSMITTER_EMPTY(n) (((n)&UART_TRANSMITTER_EMPTY )>>UART_TRANSMITTER_EMPTY_POS )
|
| 80 | |||
| 81 | 263 | up20180642 | int (subscribe_uart_interrupt)(uint8_t interrupt_bit, int *interrupt_id) { |
| 82 | if (interrupt_id == NULL) return 1; |
||
| 83 | *interrupt_id = interrupt_bit; |
||
| 84 | return (sys_irqsetpolicy(COM1_IRQ, IRQ_REENABLE | IRQ_EXCLUSIVE, interrupt_id));
|
||
| 85 | } |
||
| 86 | |||
| 87 | 252 | up20180642 | static void uart_parse_config(uart_config *config){ |
| 88 | /// LCR
|
||
| 89 | config->bits_per_char = UART_GET_BITS_PER_CHAR (config->lcr); |
||
| 90 | config->stop_bits = UART_GET_STOP_BITS (config->lcr); |
||
| 91 | config->parity = UART_GET_PARITY (config->lcr); if((config->parity & BIT(0)) == 0) config->parity = uart_parity_none; |
||
| 92 | config->break_control = UART_GET_BREAK_CONTROL (config->lcr); |
||
| 93 | config->dlab = UART_GET_DLAB (config->lcr); |
||
| 94 | /// IER
|
||
| 95 | config->received_data_int = UART_GET_INT_EN_RX (config->ier); |
||
| 96 | config->transmitter_empty_int = UART_GET_INT_EN_TX (config->ier); |
||
| 97 | config->receiver_line_stat_int = UART_GET_INT_EN_RECEIVER_LINE_STAT(config->ier); |
||
| 98 | config->modem_stat_int = UART_GET_INT_EN_MODEM_STAT (config->ier); |
||
| 99 | /// DIV LATCH
|
||
| 100 | config->divisor_latch = UART_GET_DIV_LATCH(config->dlm, config->dll); |
||
| 101 | } |
||
| 102 | |||
| 103 | static int uart_get_lcr(int base_addr, uint8_t *p){ |
||
| 104 | return util_sys_inb(base_addr+UART_LCR, p);
|
||
| 105 | } |
||
| 106 | static int uart_set_lcr(int base_addr, uint8_t config){ |
||
| 107 | if(sys_outb(base_addr+UART_LCR, config)) return WRITE_ERROR; |
||
| 108 | return SUCCESS;
|
||
| 109 | } |
||
| 110 | static int uart_get_lsr(int base_addr, uint8_t *p){ |
||
| 111 | return util_sys_inb(base_addr+UART_LSR, p);
|
||
| 112 | } |
||
| 113 | |||
| 114 | static int uart_enable_divisor_latch(int base_addr){ |
||
| 115 | int ret = SUCCESS;
|
||
| 116 | uint8_t conf; if((ret = uart_get_lcr(base_addr, &conf))) return ret; |
||
| 117 | return uart_set_lcr(base_addr, conf | UART_DLAB);
|
||
| 118 | } |
||
| 119 | static int uart_disable_divisor_latch(int base_addr){ |
||
| 120 | int ret = SUCCESS;
|
||
| 121 | uint8_t conf; if((ret = uart_get_lcr(base_addr, &conf))) return ret; |
||
| 122 | return uart_set_lcr(base_addr, conf & (~UART_DLAB));
|
||
| 123 | } |
||
| 124 | |||
| 125 | static int uart_get_ier(int base_addr, uint8_t *p){ |
||
| 126 | int ret;
|
||
| 127 | if((ret = uart_disable_divisor_latch(base_addr))) return ret; |
||
| 128 | return util_sys_inb(base_addr+UART_IER, p);
|
||
| 129 | } |
||
| 130 | static int uart_set_ier(int base_addr, uint8_t n){ |
||
| 131 | int ret;
|
||
| 132 | if((ret = uart_disable_divisor_latch(base_addr))) return ret; |
||
| 133 | if(sys_outb(base_addr+UART_IER, n)) return WRITE_ERROR; |
||
| 134 | return SUCCESS;
|
||
| 135 | } |
||
| 136 | |||
| 137 | 235 | up20180642 | int uart_get_config(int base_addr, uart_config *config){ |
| 138 | int ret = SUCCESS;
|
||
| 139 | |||
| 140 | config->base_addr = base_addr; |
||
| 141 | |||
| 142 | 252 | up20180642 | if((ret = uart_get_lcr(base_addr, &config->lcr))) return ret; |
| 143 | 235 | up20180642 | |
| 144 | 252 | up20180642 | if((ret = uart_get_ier(base_addr, &config->ier))) return ret; |
| 145 | 242 | up20180642 | |
| 146 | if((ret = uart_enable_divisor_latch (base_addr))) return ret; |
||
| 147 | 235 | up20180642 | if((ret = util_sys_inb(base_addr+UART_DLL, &config->dll ))) return ret; |
| 148 | if((ret = util_sys_inb(base_addr+UART_DLM, &config->dlm ))) return ret; |
||
| 149 | 242 | up20180642 | if((ret = uart_disable_divisor_latch(base_addr))) return ret; |
| 150 | 235 | up20180642 | |
| 151 | uart_parse_config(config); |
||
| 152 | return ret;
|
||
| 153 | } |
||
| 154 | void uart_print_config(uart_config config){
|
||
| 155 | 249 | up20180642 | |
| 156 | printf("%s configuration:\n", (config.base_addr == COM1_ADDR ? "COM1" : "COM2")); |
||
| 157 | printf("\tLCR = 0x%X: %d bits per char\t %d stop bits\t", config.lcr, config.bits_per_char, config.stop_bits);
|
||
| 158 | if((config.parity&BIT(0)) == 0) printf("NO parity\n"); |
||
| 159 | 235 | up20180642 | else switch(config.parity){ |
| 160 | 249 | up20180642 | case uart_parity_odd : printf("ODD parity\n" ); break; |
| 161 | case uart_parity_even: printf("EVEN parity\n" ); break; |
||
| 162 | 235 | up20180642 | case uart_parity_par1: printf("parity bit is 1\n"); break; |
| 163 | case uart_parity_par0: printf("parity bit is 0\n"); break; |
||
| 164 | default : printf("invalid\n" ); break; |
||
| 165 | } |
||
| 166 | 249 | up20180642 | printf("\tDLM = 0x%02X DLL=0x%02X: bitrate = %d bps\n", config.dlm, config.dll, UART_BITRATE/config.divisor_latch);
|
| 167 | printf("\tIER = 0x%02X: Rx interrupts: %s\tTx interrupts: %s\n", config.ier,
|
||
| 168 | (config.received_data_int ? "ENABLED":"DISABLED"), |
||
| 169 | (config.transmitter_empty_int ? "ENABLED":"DISABLED")); |
||
| 170 | 235 | up20180642 | } |
| 171 | |||
| 172 | int uart_set_bits_per_character(int base_addr, uint8_t bits_per_char){ |
||
| 173 | if(bits_per_char < 5 || bits_per_char > 8) return INVALID_ARG; |
||
| 174 | int ret = SUCCESS;
|
||
| 175 | bits_per_char = (bits_per_char-5)&0x3; |
||
| 176 | 252 | up20180642 | uint8_t conf; if((ret = uart_get_lcr(base_addr, &conf))) return ret; |
| 177 | 235 | up20180642 | conf = (conf & (~UART_BITS_PER_CHAR)) | bits_per_char; |
| 178 | 252 | up20180642 | return uart_set_lcr(base_addr, conf);
|
| 179 | 235 | up20180642 | } |
| 180 | int uart_set_stop_bits(int base_addr, uint8_t stop){ |
||
| 181 | if(stop != 1 && stop != 2) return INVALID_ARG; |
||
| 182 | int ret = SUCCESS;
|
||
| 183 | stop -= 1;
|
||
| 184 | stop = (stop&1)<<2; |
||
| 185 | 252 | up20180642 | uint8_t conf; if((ret = uart_get_lcr(base_addr, &conf))) return ret; |
| 186 | 235 | up20180642 | conf = (conf & (~UART_STOP_BITS)) | stop; |
| 187 | 252 | up20180642 | return uart_set_lcr(base_addr, conf);
|
| 188 | 235 | up20180642 | } |
| 189 | int uart_set_parity(int base_addr, uart_parity par){ |
||
| 190 | int ret = SUCCESS;
|
||
| 191 | uint8_t parity = par << 3;
|
||
| 192 | 252 | up20180642 | uint8_t conf; if((ret = uart_get_lcr(base_addr, &conf))) return ret; |
| 193 | 235 | up20180642 | conf = (conf & (~UART_PARITY)) | parity; |
| 194 | 252 | up20180642 | return uart_set_lcr(base_addr, conf);
|
| 195 | 235 | up20180642 | } |
| 196 | 241 | up20180642 | int uart_set_bit_rate(int base_addr, float bit_rate){ |
| 197 | 235 | up20180642 | int ret = SUCCESS;
|
| 198 | uint16_t latch = UART_BITRATE/bit_rate; |
||
| 199 | 241 | up20180642 | uint8_t dll = UART_GET_DLL(latch); |
| 200 | uint8_t dlm = UART_GET_DLM(latch); |
||
| 201 | 235 | up20180642 | if((ret = uart_enable_divisor_latch(base_addr))) return ret; |
| 202 | if(sys_outb(base_addr+UART_DLL, dll)) return WRITE_ERROR; |
||
| 203 | if(sys_outb(base_addr+UART_DLM, dlm)) return WRITE_ERROR; |
||
| 204 | 249 | up20180642 | if((ret = uart_disable_divisor_latch(base_addr))) return ret; |
| 205 | 235 | up20180642 | return SUCCESS;
|
| 206 | } |
||
| 207 | 249 | up20180642 | |
| 208 | 252 | up20180642 | static int uart_get_char(int base_addr, uint8_t *p){ |
| 209 | 249 | up20180642 | int ret;
|
| 210 | if((ret = uart_disable_divisor_latch(base_addr))) return ret; |
||
| 211 | return util_sys_inb(base_addr+UART_RBR, p);
|
||
| 212 | } |
||
| 213 | 252 | up20180642 | static int uart_send_char(int base_addr, uint8_t c){ |
| 214 | 249 | up20180642 | int ret;
|
| 215 | if((ret = uart_disable_divisor_latch(base_addr))) return ret; |
||
| 216 | 252 | up20180642 | if(sys_outb(base_addr+UART_THR, c)) return WRITE_ERROR; |
| 217 | 249 | up20180642 | return SUCCESS;
|
| 218 | } |
||
| 219 | 252 | up20180642 | static int uart_receiver_ready(int base_addr){ |
| 220 | 249 | up20180642 | uint8_t lsr; |
| 221 | if(uart_get_lsr(base_addr, &lsr)) return false; |
||
| 222 | return UART_GET_RECEIVER_READY(lsr);
|
||
| 223 | } |
||
| 224 | 252 | up20180642 | static int uart_transmitter_empty(int base_addr){ |
| 225 | 249 | up20180642 | uint8_t lsr; |
| 226 | if(uart_get_lsr(base_addr, &lsr)) return false; |
||
| 227 | return UART_GET_TRANSMITTER_EMPTY(lsr);
|
||
| 228 | } |
||
| 229 | 252 | up20180642 | |
| 230 | int uart_enable_int_rx(int base_addr){ |
||
| 231 | int ret;
|
||
| 232 | uint8_t ier; |
||
| 233 | if((ret = uart_get_ier(base_addr, &ier))) return ret; |
||
| 234 | ier |= UART_INT_EN_RX; |
||
| 235 | return uart_set_ier(base_addr, ier);
|
||
| 236 | } |
||
| 237 | int uart_disable_int_rx(int base_addr){ |
||
| 238 | int ret;
|
||
| 239 | uint8_t ier; |
||
| 240 | if((ret = uart_get_ier(base_addr, &ier))) return ret; |
||
| 241 | ier &= ~UART_INT_EN_RX; |
||
| 242 | return uart_set_ier(base_addr, ier);
|
||
| 243 | } |
||
| 244 | int uart_enable_int_tx(int base_addr){ |
||
| 245 | int ret;
|
||
| 246 | uint8_t ier; |
||
| 247 | if((ret = uart_get_ier(base_addr, &ier))) return ret; |
||
| 248 | ier |= UART_INT_EN_TX; |
||
| 249 | return uart_set_ier(base_addr, ier);
|
||
| 250 | } |
||
| 251 | int uart_disable_int_tx(int base_addr){ |
||
| 252 | int ret;
|
||
| 253 | uint8_t ier; |
||
| 254 | if((ret = uart_get_ier(base_addr, &ier))) return ret; |
||
| 255 | ier &= ~UART_INT_EN_TX; |
||
| 256 | return uart_set_ier(base_addr, ier);
|
||
| 257 | } |
||
| 258 | |||
| 259 | 269 | up20180642 | /*static*/ int uart_has_communication_error(int base_addr){ |
| 260 | 249 | up20180642 | int ret;
|
| 261 | 261 | up20180642 | uint8_t lsr; |
| 262 | if((ret = uart_get_lsr(base_addr, &lsr))) return 1; |
||
| 263 | lsr &= (UART_OVERRUN_ERROR & |
||
| 264 | UART_PARITY_ERROR & |
||
| 265 | UART_FRAMING_ERROR); |
||
| 266 | return (lsr ? 1 : 0); |
||
| 267 | } |
||
| 268 | |||
| 269 | #include "nctp.h" |
||
| 270 | |||
| 271 | #define NCTP_START 0x80 |
||
| 272 | #define NCTP_END 0xFF |
||
| 273 | #define NCTP_TRIES 3 |
||
| 274 | #define NCTP_OK 0xFF |
||
| 275 | #define NCTP_NOK 0x00 |
||
| 276 | #define NCTP_MAX_SIZE 1024 //in bytes |
||
| 277 | |||
| 278 | int nctp_send_char_poll(int base_addr, uint8_t c){ |
||
| 279 | for(int i = 0; i < NCTP_TRIES; ++i) |
||
| 280 | if(uart_transmitter_empty(base_addr))
|
||
| 281 | return uart_send_char(base_addr, c);
|
||
| 282 | return TIMEOUT_ERROR;
|
||
| 283 | } |
||
| 284 | int nctp_get_char_poll (int base_addr, uint8_t *p){ |
||
| 285 | for(int i = 0; i < NCTP_TRIES; ++i) |
||
| 286 | if(uart_receiver_ready(base_addr))
|
||
| 287 | return uart_get_char(base_addr, p);
|
||
| 288 | return TIMEOUT_ERROR;
|
||
| 289 | } |
||
| 290 | |||
| 291 | int nctp_expect_ok(int base_addr){ |
||
| 292 | int ret;
|
||
| 293 | uint8_t ok; |
||
| 294 | if((ret = nctp_get_char_poll(base_addr, &ok))) return ret; |
||
| 295 | int cnt = 0; |
||
| 296 | while(ok){
|
||
| 297 | cnt += ok&1;
|
||
| 298 | ok >>= 1;
|
||
| 299 | } |
||
| 300 | if(cnt > 4) return SUCCESS; |
||
| 301 | else return NOK; |
||
| 302 | } |
||
| 303 | |||
| 304 | int nctp_send_char_try(int base_addr, uint8_t c){ |
||
| 305 | int ret;
|
||
| 306 | for(size_t k = 0; k < NCTP_TRIES; ++k){ |
||
| 307 | if((ret = nctp_send_char_poll(base_addr, c))) return ret; |
||
| 308 | 269 | up20180642 | return SUCCESS;
|
| 309 | //if(nctp_expect_ok(base_addr) == SUCCESS) return SUCCESS;
|
||
| 310 | 261 | up20180642 | } |
| 311 | return TRANS_FAILED;
|
||
| 312 | } |
||
| 313 | int nctp_get_char_try (int base_addr, uint8_t *p){ |
||
| 314 | int ret;
|
||
| 315 | for(size_t k = 0; k < NCTP_TRIES; ++k){ |
||
| 316 | if((ret = nctp_get_char_poll (base_addr, p))) return ret; |
||
| 317 | 269 | up20180642 | return SUCCESS;
|
| 318 | //if(!uart_has_communication_error(base_addr))
|
||
| 319 | //return nctp_send_char_try(base_addr, NCTP_OK ); //If it does not have any errors
|
||
| 320 | 261 | up20180642 | } |
| 321 | if((ret = nctp_send_char_poll(base_addr, NCTP_NOK))) return ret; |
||
| 322 | return TRANS_FAILED;
|
||
| 323 | } |
||
| 324 | |||
| 325 | 269 | up20180642 | static int nctp_send_inner(int base_addr, size_t num, uint8_t* ptr[], size_t sz[]){ |
| 326 | 261 | up20180642 | {
|
| 327 | int cnt = 0; |
||
| 328 | for(size_t i = 0; i < num; ++i){ |
||
| 329 | cnt += sz[i]; |
||
| 330 | if(cnt > NCTP_MAX_SIZE) return TRANS_REFUSED; |
||
| 331 | } |
||
| 332 | } |
||
| 333 | |||
| 334 | int ret;
|
||
| 335 | |||
| 336 | if((ret = nctp_send_char_try(base_addr, NCTP_START))) return ret; |
||
| 337 | for(size_t i = 0; i < num; ++i){ |
||
| 338 | uint8_t *p = ptr[i]; size_t s = sz[i]; |
||
| 339 | for(size_t j = 0; j < s; ++j, ++p) |
||
| 340 | if((ret = nctp_send_char_try(base_addr, *p)))
|
||
| 341 | return ret;
|
||
| 342 | } |
||
| 343 | if((ret = nctp_send_char_try(base_addr, NCTP_END))) return ret; |
||
| 344 | |||
| 345 | 249 | up20180642 | return SUCCESS;
|
| 346 | } |
||
| 347 | 269 | up20180642 | int nctp_send(int base_addr, size_t num, uint8_t* ptr[], size_t sz[]){ |
| 348 | int ret;
|
||
| 349 | if((ret = uart_disable_int_rx(base_addr))) return ret; |
||
| 350 | if((ret = uart_disable_int_tx(base_addr))) return ret; |
||
| 351 | int r = nctp_send_inner(base_addr, num, ptr, sz);
|
||
| 352 | if((ret = uart_enable_int_rx(base_addr))) return ret; |
||
| 353 | if((ret = uart_disable_int_tx(base_addr))) return ret; |
||
| 354 | return r;
|
||
| 355 | } |
||
| 356 | 261 | up20180642 | |
| 357 | 269 | up20180642 | static int nctp_get_inner(int base_addr, uint8_t **dest){ |
| 358 | 249 | up20180642 | int ret;
|
| 359 | 269 | up20180642 | free(*dest); |
| 360 | *dest = malloc(NCTP_MAX_SIZE*sizeof(uint8_t)); size_t i = 0; |
||
| 361 | if(*dest == NULL) return NULL_PTR; |
||
| 362 | 261 | up20180642 | uint8_t c; |
| 363 | if((ret = nctp_get_char_try (base_addr, &c ))) return ret; |
||
| 364 | while(true){ |
||
| 365 | if(i >= NCTP_MAX_SIZE) return TRANS_REFUSED; |
||
| 366 | if((ret = nctp_get_char_try (base_addr, &c))) return ret; |
||
| 367 | 269 | up20180642 | if(c == NCTP_END) return SUCCESS; |
| 368 | else (*dest)[i++] = c;
|
||
| 369 | 261 | up20180642 | } |
| 370 | 249 | up20180642 | } |
| 371 | 269 | up20180642 | int nctp_get(int base_addr, uint8_t **dest){ |
| 372 | int ret;
|
||
| 373 | if((ret = uart_disable_int_rx(base_addr))) return ret; |
||
| 374 | if((ret = uart_disable_int_tx(base_addr))) return ret; |
||
| 375 | int r = nctp_get_inner(base_addr, dest);
|
||
| 376 | if((ret = uart_enable_int_rx(base_addr))) return ret; |
||
| 377 | if((ret = uart_disable_int_tx(base_addr))) return ret; |
||
| 378 | return r;
|
||
| 379 | } |