root / lab2 / timer.c @ 25
History | View | Annotate | Download (3.35 KB)
| 1 | 4 | up20180655 | #include <lcom/lcf.h> |
|---|---|---|---|
| 2 | #include <lcom/timer.h> |
||
| 3 | |||
| 4 | #include <stdint.h> |
||
| 5 | |||
| 6 | #include "i8254.h" |
||
| 7 | |||
| 8 | int (timer_set_frequency)(uint8_t timer, uint32_t freq) {
|
||
| 9 | 18 | up20180655 | |
| 10 | // Frequencies out this range are not supported (by limitation of hardware)
|
||
| 11 | if (freq > TIMER_FREQ || freq < TIMER_MIN_FREQ) return 1; |
||
| 12 | |||
| 13 | 10 | up20180655 | uint8_t status = 0;
|
| 14 | if (timer_get_conf(timer, &status)) return 1; |
||
| 15 | //Make command
|
||
| 16 | uint8_t write_cmd = 0;
|
||
| 17 | //Select timer
|
||
| 18 | switch(timer) {
|
||
| 19 | 11 | up20180655 | case 0: write_cmd |= TIMER_SEL0; break; |
| 20 | case 1: write_cmd |= TIMER_SEL1; break; |
||
| 21 | case 2: write_cmd |= TIMER_SEL2; break; |
||
| 22 | default: return 1; break; |
||
| 23 | 10 | up20180655 | } |
| 24 | //Change both LSB and MSB
|
||
| 25 | write_cmd |= TIMER_LSB_MSB; |
||
| 26 | //Keep 4 least significant bits
|
||
| 27 | write_cmd |= (status & (TIMER_MODE_MASK | TIMER_BCD)); |
||
| 28 | //Write cmd
|
||
| 29 | 11 | up20180655 | if (sys_outb(TIMER_CTRL, write_cmd)) return 1; |
| 30 | 10 | up20180655 | |
| 31 | 11 | up20180655 | // counter_init = clock/freq
|
| 32 | 15 | up20180655 | uint16_t counter_init = (uint16_t)(TIMER_FREQ / freq); |
| 33 | 10 | up20180655 | |
| 34 | 11 | up20180655 | int timer_port = 0; |
| 35 | switch(timer) {
|
||
| 36 | 12 | up20180655 | case 0: timer_port = TIMER_0; break; |
| 37 | case 1: timer_port = TIMER_1; break; |
||
| 38 | case 2: timer_port = TIMER_2; break; |
||
| 39 | 15 | up20180655 | default: return 1; break; |
| 40 | 11 | up20180655 | } |
| 41 | 15 | up20180655 | uint8_t lsb = 0, msb = 0; |
| 42 | if (util_get_LSB(counter_init, &lsb)) return 1; |
||
| 43 | if (util_get_MSB(counter_init, &msb)) return 1; |
||
| 44 | 11 | up20180655 | |
| 45 | 15 | up20180655 | if (sys_outb(timer_port, lsb)) return 1; |
| 46 | if (sys_outb(timer_port, msb)) return 1; |
||
| 47 | 11 | up20180655 | |
| 48 | 15 | up20180655 | return 0; |
| 49 | 4 | up20180655 | } |
| 50 | |||
| 51 | 22 | up20180642 | int hook_id = 2; |
| 52 | |||
| 53 | 4 | up20180655 | int (timer_subscribe_int)(uint8_t *bit_no) {
|
| 54 | 25 | up20180655 | *bit_no = hook_id; |
| 55 | 19 | up20180642 | if(sys_irqsetpolicy(TIMER0_IRQ, IRQ_REENABLE, &hook_id)) return 1; |
| 56 | return 0; |
||
| 57 | 4 | up20180655 | } |
| 58 | |||
| 59 | 22 | up20180642 | int (timer_unsubscribe_int)() {
|
| 60 | 19 | up20180642 | if(sys_irqrmpolicy(&hook_id)) return 1; |
| 61 | return 0; |
||
| 62 | 4 | up20180655 | } |
| 63 | |||
| 64 | 25 | up20180655 | uint32_t no_interrupts = 0;
|
| 65 | 4 | up20180655 | void (timer_int_handler)() {
|
| 66 | 20 | up20180655 | no_interrupts++; |
| 67 | 4 | up20180655 | } |
| 68 | |||
| 69 | int (timer_get_conf)(uint8_t timer, uint8_t *st) {
|
||
| 70 | 9 | up20180642 | // Write read-back command to TIMER_CTRL
|
| 71 | 5 | up20180642 | u32_t cmd = TIMER_RB_CMD | TIMER_RB_COUNT_ | TIMER_RB_SEL(timer); |
| 72 | 10 | up20180655 | if(sys_outb(TIMER_CTRL, cmd)) return 1; |
| 73 | 4 | up20180655 | |
| 74 | 5 | up20180642 | int read_port;
|
| 75 | 7 | up20180655 | switch(timer) {
|
| 76 | 5 | up20180642 | case 0: read_port = TIMER_0; break; |
| 77 | case 1: read_port = TIMER_1; break; |
||
| 78 | case 2: read_port = TIMER_2; break; |
||
| 79 | 6 | up20180642 | default: return 1; break; |
| 80 | 5 | up20180642 | } |
| 81 | if(util_sys_inb(read_port, st)) return 1; |
||
| 82 | return 0; |
||
| 83 | 4 | up20180655 | } |
| 84 | |||
| 85 | 6 | up20180642 | int (timer_display_conf)(uint8_t timer, uint8_t st, enum timer_status_field field) { |
| 86 | union timer_status_field_val conf;
|
||
| 87 | uint8_t in_mode; |
||
| 88 | 16 | up20180642 | switch(field){
|
| 89 | case tsf_all:
|
||
| 90 | conf.byte = st; |
||
| 91 | break;
|
||
| 92 | case tsf_initial:
|
||
| 93 | in_mode = (st & TIMER_INMODE_MASK) >> TIMER_INMODE_POS; |
||
| 94 | switch(in_mode){
|
||
| 95 | case 0: conf.in_mode = INVAL_val ; break; //000 |
||
| 96 | case 1: conf.in_mode = LSB_only ; break; //001 |
||
| 97 | case 2: conf.in_mode = MSB_only ; break; //010 |
||
| 98 | case 3: conf.in_mode = MSB_after_LSB; break; //011 |
||
| 99 | default: return 1; break; |
||
| 100 | } |
||
| 101 | break;
|
||
| 102 | case tsf_mode:
|
||
| 103 | conf.count_mode = (st & TIMER_MODE_MASK)>>TIMER_MODE_POS; |
||
| 104 | 17 | up20180642 | if(conf.count_mode == TIMER_MODE_2ALT || conf.count_mode == TIMER_MODE_3ALT)
|
| 105 | 16 | up20180642 | conf.count_mode &= TIMER_MODE_RED2; |
| 106 | break;
|
||
| 107 | case tsf_base:
|
||
| 108 | conf.bcd = st & TIMER_BCD; |
||
| 109 | break;
|
||
| 110 | default: return 1; break; |
||
| 111 | 5 | up20180642 | } |
| 112 | 16 | up20180642 | if(timer_print_config(timer, field, conf)) return 1; |
| 113 | 6 | up20180642 | return 0; |
| 114 | } |