LCOM1920-T02G10

#ifndef __MINIX_PADCONF_H

#define __MINIX_PADCONF_H

/* Define the start address of the padconf registers and the size of the block.

 * The base must be page aligned, so we round down and the kernel adds the

 * offset. The size must be a multiple of ARM_PAGE_SIZE, so we round up to 4KB.

 */

#define PADCONF_AM335X_REGISTERS_BASE 0x44E10000

#define PADCONF_AM335X_REGISTERS_OFFSET 0x0000

#define PADCONF_AM335X_REGISTERS_SIZE 0x1000 /* OFFSET + highest reg, rounded up */

#define PADCONF_DM37XX_REGISTERS_BASE 0x48002000

#define PADCONF_DM37XX_REGISTERS_OFFSET 0x0030

#define PADCONF_DM37XX_REGISTERS_SIZE 0x1000 /* OFFSET + highest reg, rounded up */

#define PADCONF_MUXMODE(X)  (X & 0x7)        /* mode 1 til 7 [2:0] */

#define PADCONF_PULL_MODE(X)  ((X & 0x3) << 3)        /* 2 bits[4:3] */

#define PADCONF_PULL_MODE_PD_DIS PADCONF_PULL_MODE(0)        /* pull down disabled */

#define PADCONF_PULL_MODE_PD_EN PADCONF_PULL_MODE(1)        /* pull down enabled */

#define PADCONF_PULL_MODE_PU_DIS PADCONF_PULL_MODE(2)        /* pull up disabled */

#define PADCONF_PULL_MODE_PU_EN PADCONF_PULL_MODE(3)        /* pull up enabled */

#define PADCONF_INPUT_ENABLE(X)  ((X & 0x1) << 8)        /* 1 bits[8] */

#define PADCONF_OFF_MODE(X)  ((X & 0xFE) << 9)        /* 5 bits[13:9] */

/* padconf pin definitions */

#define CONTROL_PADCONF_SDRC_D0 (0x00000000)

#define CONTROL_PADCONF_SDRC_D2 (0x00000004)

#define CONTROL_PADCONF_SDRC_D4 (0x00000008)

#define CONTROL_PADCONF_SDRC_D6 (0x0000000C)

#define CONTROL_PADCONF_SDRC_D8 (0x00000010)

#define CONTROL_PADCONF_SDRC_D10 (0x00000014)

#define CONTROL_PADCONF_SDRC_D12 (0x00000018)

#define CONTROL_PADCONF_SDRC_D14 (0x0000001C)

#define CONTROL_PADCONF_SDRC_D16 (0x00000020)

#define CONTROL_PADCONF_SDRC_D18 (0x00000024)

#define CONTROL_PADCONF_SDRC_D20 (0x00000028)

#define CONTROL_PADCONF_SDRC_D22 (0x0000002C)

#define CONTROL_PADCONF_SDRC_D24 (0x00000030)

#define CONTROL_PADCONF_SDRC_D26 (0x00000034)

#define CONTROL_PADCONF_SDRC_D28 (0x00000038)

#define CONTROL_PADCONF_SDRC_D30 (0x0000003C)

#define CONTROL_PADCONF_SDRC_CLK (0x00000040)

#define CONTROL_PADCONF_SDRC_DQS1 (0x00000044)

#define CONTROL_PADCONF_SDRC_DQS3 (0x00000048)

#define CONTROL_PADCONF_GPMC_A2 (0x0000004C)

#define CONTROL_PADCONF_GPMC_A4 (0x00000050)

#define CONTROL_PADCONF_GPMC_A6 (0x00000054)

#define CONTROL_PADCONF_GPMC_A8 (0x00000058)

#define CONTROL_PADCONF_GPMC_A10 (0x0000005C)

#define CONTROL_PADCONF_GPMC_D1 (0x00000060)

#define CONTROL_PADCONF_GPMC_D3 (0x00000064)

#define CONTROL_PADCONF_GPMC_D5 (0x00000068)

#define CONTROL_PADCONF_GPMC_D7 (0x0000006C)

#define CONTROL_PADCONF_GPMC_D9 (0x00000070)

#define CONTROL_PADCONF_GPMC_D11 (0x00000074)

#define CONTROL_PADCONF_GPMC_D13 (0x00000078)

#define CONTROL_PADCONF_GPMC_D15 (0x0000007C)

#define CONTROL_PADCONF_GPMC_NCS1 (0x00000080)

#define CONTROL_PADCONF_GPMC_NCS3 (0x00000084)

#define CONTROL_PADCONF_GPMC_NCS5 (0x00000088)

#define CONTROL_PADCONF_GPMC_NCS7 (0x0000008C)

#define CONTROL_PADCONF_GPMC_NADV_ALE (0x00000090)

#define CONTROL_PADCONF_GPMC_NWE (0x00000094)

#define CONTROL_PADCONF_GPMC_NBE1 (0x00000098)

#define CONTROL_PADCONF_GPMC_WAIT0 (0x0000009C)

#define CONTROL_PADCONF_GPMC_WAIT2 (0x000000A0)

#define CONTROL_PADCONF_DSS_PCLK (0x000000A4)

#define CONTROL_PADCONF_DSS_VSYNC (0x000000A8)

#define CONTROL_PADCONF_DSS_DATA0 (0x000000AC)

#define CONTROL_PADCONF_DSS_DATA2 (0x000000B0)

#define CONTROL_PADCONF_DSS_DATA4 (0x000000B4)

#define CONTROL_PADCONF_DSS_DATA6 (0x000000B8)

#define CONTROL_PADCONF_DSS_DATA8 (0x000000BC)

#define CONTROL_PADCONF_DSS_DATA10 (0x000000C0)

#define CONTROL_PADCONF_DSS_DATA12 (0x000000C4)

#define CONTROL_PADCONF_DSS_DATA14 (0x000000C8)

#define CONTROL_PADCONF_DSS_DATA16 (0x000000CC)

#define CONTROL_PADCONF_DSS_DATA18 (0x000000D0)

#define CONTROL_PADCONF_DSS_DATA20 (0x000000D4)

#define CONTROL_PADCONF_DSS_DATA22 (0x000000D8)

#define CONTROL_PADCONF_CAM_HS (0x000000DC)

#define CONTROL_PADCONF_CAM_XCLKA (0x000000E0)

#define CONTROL_PADCONF_CAM_FLD (0x000000E4)

#define CONTROL_PADCONF_CAM_D1 (0x000000E8)

#define CONTROL_PADCONF_CAM_D3 (0x000000EC)

#define CONTROL_PADCONF_CAM_D5 (0x000000F0)

#define CONTROL_PADCONF_CAM_D7 (0x000000F4)

#define CONTROL_PADCONF_CAM_D9 (0x000000F8)

#define CONTROL_PADCONF_CAM_D11 (0x000000FC)

#define CONTROL_PADCONF_CAM_WEN (0x00000100)

#define CONTROL_PADCONF_CSI2_DX0 (0x00000104)

#define CONTROL_PADCONF_CSI2_DX1 (0x00000108)

#define CONTROL_PADCONF_MCBSP2_FSX (0x0000010C)

#define CONTROL_PADCONF_MCBSP2_DR (0x00000110)

#define CONTROL_PADCONF_MMC1_CLK (0x00000114)

#define CONTROL_PADCONF_MMC1_DAT0 (0x00000118)

#define CONTROL_PADCONF_MMC1_DAT2 (0x0000011C)

#define CONTROL_PADCONF_MMC2_CLK (0x00000128)

#define CONTROL_PADCONF_MMC2_DAT0 (0x0000012C)

#define CONTROL_PADCONF_MMC2_DAT2 (0x00000130)

#define CONTROL_PADCONF_MMC2_DAT4 (0x00000134)

#define CONTROL_PADCONF_MMC2_DAT6 (0x00000138)

#define CONTROL_PADCONF_MCBSP3_DX (0x0000013C)

#define CONTROL_PADCONF_MCBSP3_CLKX (0x00000140)

#define CONTROL_PADCONF_UART2_CTS (0x00000144)

#define CONTROL_PADCONF_UART2_TX (0x00000148)

#define CONTROL_PADCONF_UART1_TX (0x0000014C)

#define CONTROL_PADCONF_UART1_CTS (0x00000150)

#define CONTROL_PADCONF_MCBSP4_CLKX (0x00000154)

#define CONTROL_PADCONF_MCBSP4_DX (0x00000158)

#define CONTROL_PADCONF_MCBSP1_CLKR (0x0000015C)

#define CONTROL_PADCONF_MCBSP1_DX (0x00000160)

#define CONTROL_PADCONF_MCBSP_CLKS (0x00000164)

#define CONTROL_PADCONF_MCBSP1_CLKX (0x00000168)

#define CONTROL_PADCONF_UART3_RTS_SD (0x0000016C)

#define CONTROL_PADCONF_UART3_TX_IRTX (0x00000170)

#define CONTROL_PADCONF_HSUSB0_STP (0x00000174)

#define CONTROL_PADCONF_HSUSB0_NXT (0x00000178)

#define CONTROL_PADCONF_HSUSB0_DATA1 (0x0000017C)

#define CONTROL_PADCONF_HSUSB0_DATA3 (0x00000180)

#define CONTROL_PADCONF_HSUSB0_DATA5 (0x00000184)

#define CONTROL_PADCONF_HSUSB0_DATA7 (0x00000188)

#define CONTROL_PADCONF_I2C1_SDA (0x0000018C)

#define CONTROL_PADCONF_I2C2_SDA (0x00000190)

#define CONTROL_PADCONF_I2C3_SDA (0x00000194)

#define CONTROL_PADCONF_MCSPI1_CLK (0x00000198)

#define CONTROL_PADCONF_MCSPI1_SOMI (0x0000019C)

#define CONTROL_PADCONF_MCSPI1_CS1 (0x000001A0)

#define CONTROL_PADCONF_MCSPI1_CS3 (0x000001A4)

#define CONTROL_PADCONF_MCSPI2_SIMO (0x000001A8)

#define CONTROL_PADCONF_MCSPI2_CS0 (0x000001AC)

#define CONTROL_PADCONF_SYS_NIRQ (0x000001B0)

#define CONTROL_PADCONF_SAD2D_MCAD0 (0x000001B4)

#define CONTROL_PADCONF_SAD2D_MCAD2 (0x000001B8)

#define CONTROL_PADCONF_SAD2D_MCAD4 (0x000001BC)

#define CONTROL_PADCONF_SAD2D_MCAD6 (0x000001C0)

#define CONTROL_PADCONF_SAD2D_MCAD8 (0x000001C4)

#define CONTROL_PADCONF_SAD2D_MCAD10 (0x000001C8)

#define CONTROL_PADCONF_SAD2D_MCAD12 (0x000001CC)

#define CONTROL_PADCONF_SAD2D_MCAD14 (0x000001D0)

#define CONTROL_PADCONF_SAD2D_MCAD16 (0x000001D4)

#define CONTROL_PADCONF_SAD2D_MCAD18 (0x000001D8)

#define CONTROL_PADCONF_SAD2D_MCAD20 (0x000001DC)

#define CONTROL_PADCONF_SAD2D_MCAD22 (0x000001E0)

#define CONTROL_PADCONF_SAD2D_MCAD24 (0x000001E4)

#define CONTROL_PADCONF_SAD2D_MCAD26 (0x000001E8)

#define CONTROL_PADCONF_SAD2D_MCAD28 (0x000001EC)

#define CONTROL_PADCONF_SAD2D_MCAD30 (0x000001F0)

#define CONTROL_PADCONF_SAD2D_MCAD32 (0x000001F4)

#define CONTROL_PADCONF_SAD2D_MCAD34 (0x000001F8)

#define CONTROL_PADCONF_SAD2D_MCAD36 (0x000001FC)

#define CONTROL_PADCONF_SAD2D_NRESPWRON (0x00000200)

#define CONTROL_PADCONF_SAD2D_ARMNIRQ (0x00000204)

#define CONTROL_PADCONF_SAD2D_SPINT (0x00000208)

#define CONTROL_PADCONF_SAD2D_DMAREQ0 (0x0000020C)

#define CONTROL_PADCONF_SAD2D_DMAREQ2 (0x00000210)

#define CONTROL_PADCONF_SAD2D_NTRST (0x00000214)

#define CONTROL_PADCONF_SAD2D_TDO (0x00000218)

#define CONTROL_PADCONF_SAD2D_TCK (0x0000021C)

#define CONTROL_PADCONF_SAD2D_MSTDBY (0x00000220)

#define CONTROL_PADCONF_SAD2D_IDLEACK (0x00000224)

#define CONTROL_PADCONF_SAD2D_SWRITE (0x00000228)

#define CONTROL_PADCONF_SAD2D_SREAD (0x0000022C)

#define CONTROL_PADCONF_SAD2D_SBUSFLAG (0x00000230)

#define CONTROL_PADCONF_SDRC_CKE1 (0x00000234)

#define CONTROL_PADCONF_SDRC_BA0 (0x00000570)

#define CONTROL_PADCONF_SDRC_A0 (0x00000574)

#define CONTROL_PADCONF_SDRC_A2 (0x00000578)

#define CONTROL_PADCONF_SDRC_A4 (0x0000057C)

#define CONTROL_PADCONF_SDRC_A6 (0x00000580)

#define CONTROL_PADCONF_SDRC_A8 (0x00000584)

#define CONTROL_PADCONF_SDRC_A10 (0x00000588)

#define CONTROL_PADCONF_SDRC_A12 (0x0000058C)

#define CONTROL_PADCONF_SDRC_A14 (0x00000590)

#define CONTROL_PADCONF_SDRC_NCS1 (0x00000594)

#define CONTROL_PADCONF_SDRC_NRAS (0x00000598)

#define CONTROL_PADCONF_SDRC_NWE (0x0000059C)

#define CONTROL_PADCONF_SDRC_DM1 (0x000005A0)

#define CONTROL_PADCONF_SDRC_DM3 (0x000005A4)

#define CONTROL_PADCONF_ETK_CLK (0x000005A8)

#define CONTROL_PADCONF_ETK_D0 (0x000005AC)

#define CONTROL_PADCONF_ETK_D2 (0x000005B0)

#define CONTROL_PADCONF_ETK_D4 (0x000005B4)

#define CONTROL_PADCONF_ETK_D6 (0x000005B8)

#define CONTROL_PADCONF_ETK_D8 (0x000005BC)

#define CONTROL_PADCONF_ETK_D10 (0x000005C0)

#define CONTROL_PADCONF_ETK_D12 (0x000005C4)

#define CONTROL_PADCONF_ETK_D14 (0x000005C8)

/* conf pin descriptions (am335x) */

#define CONTROL_CONF_GPMC_AD0 (0x00000800)

#define CONTROL_CONF_GPMC_AD1 (0x00000804)

#define CONTROL_CONF_GPMC_AD2 (0x00000808)

#define CONTROL_CONF_GPMC_AD3 (0x0000080C)

#define CONTROL_CONF_GPMC_AD4 (0x00000810)

#define CONTROL_CONF_GPMC_AD5 (0x00000814)

#define CONTROL_CONF_GPMC_AD6 (0x00000818)

#define CONTROL_CONF_GPMC_AD7 (0x0000081C)

#define CONTROL_CONF_GPMC_AD8 (0x00000820)

#define CONTROL_CONF_GPMC_AD9 (0x00000824)

#define CONTROL_CONF_GPMC_AD10 (0x00000828)

#define CONTROL_CONF_GPMC_AD11 (0x0000082C)

#define CONTROL_CONF_GPMC_AD12 (0x00000830)

#define CONTROL_CONF_GPMC_AD13 (0x00000834)

#define CONTROL_CONF_GPMC_AD14 (0x00000838)

#define CONTROL_CONF_GPMC_AD15 (0x0000083C)

#define CONTROL_CONF_GPMC_A0 (0x00000840)

#define CONTROL_CONF_GPMC_A1 (0x00000844)

#define CONTROL_CONF_GPMC_A2 (0x00000848)

#define CONTROL_CONF_GPMC_A3 (0x0000084C)

#define CONTROL_CONF_GPMC_A4 (0x00000850)

#define CONTROL_CONF_GPMC_A5 (0x00000854)

#define CONTROL_CONF_GPMC_A6 (0x00000858)

#define CONTROL_CONF_GPMC_A7 (0x0000085C)

#define CONTROL_CONF_GPMC_A8 (0x00000860)

#define CONTROL_CONF_GPMC_A9 (0x00000864)

#define CONTROL_CONF_GPMC_A10 (0x00000868)

#define CONTROL_CONF_GPMC_A11 (0x0000086C)

#define CONTROL_CONF_GPMC_WAIT0 (0x00000870)

#define CONTROL_CONF_GPMC_WPN (0x00000874)

#define CONTROL_CONF_GPMC_BEN1 (0x00000878)

#define CONTROL_CONF_GPMC_CSN0 (0x0000087C)

#define CONTROL_CONF_GPMC_CSN1 (0x00000880)

#define CONTROL_CONF_GPMC_CSN2 (0x00000884)

#define CONTROL_CONF_GPMC_CSN3 (0x00000888)

#define CONTROL_CONF_GPMC_CLK (0x0000088C)

#define CONTROL_CONF_GPMC_ADVN_ALE (0x00000890)

#define CONTROL_CONF_GPMC_OEN_REN (0x00000894)

#define CONTROL_CONF_GPMC_WEN (0x00000898)

#define CONTROL_CONF_GPMC_BEN0_CLE (0x0000089C)

#define CONTROL_CONF_LCD_DATA0 (0x000008A0)

#define CONTROL_CONF_LCD_DATA1 (0x000008A4)

#define CONTROL_CONF_LCD_DATA2 (0x000008A8)

#define CONTROL_CONF_LCD_DATA3 (0x000008AC)

#define CONTROL_CONF_LCD_DATA4 (0x000008B0)

#define CONTROL_CONF_LCD_DATA5 (0x000008B4)

#define CONTROL_CONF_LCD_DATA6 (0x000008B8)

#define CONTROL_CONF_LCD_DATA7 (0x000008BC)

#define CONTROL_CONF_LCD_DATA8 (0x000008C0)

#define CONTROL_CONF_LCD_DATA9 (0x000008C4)

#define CONTROL_CONF_LCD_DATA10 (0x000008C8)

#define CONTROL_CONF_LCD_DATA11 (0x000008CC)

#define CONTROL_CONF_LCD_DATA12 (0x000008D0)

#define CONTROL_CONF_LCD_DATA13 (0x000008D4)

#define CONTROL_CONF_LCD_DATA14 (0x000008D8)

#define CONTROL_CONF_LCD_DATA15 (0x000008DC)

#define CONTROL_CONF_LCD_VSYNC (0x000008E0)

#define CONTROL_CONF_LCD_HSYNC (0x000008E4)

#define CONTROL_CONF_LCD_PCLK (0x000008E8)

#define CONTROL_CONF_LCD_AC_BIAS_EN (0x000008EC)

#define CONTROL_CONF_MMC0_DAT3 (0x000008F0)

#define CONTROL_CONF_MMC0_DAT2 (0x000008F4)

#define CONTROL_CONF_MMC0_DAT1 (0x000008F8)

#define CONTROL_CONF_MMC0_DAT0 (0x000008FC)

#define CONTROL_CONF_MMC0_CLK (0x00000900)

#define CONTROL_CONF_MMC0_CMD (0x00000904)

#define CONTROL_CONF_MII1_COL (0x00000908)

#define CONTROL_CONF_MII1_CRS (0x0000090C)

#define CONTROL_CONF_MII1_RX_ER (0x00000910)

#define CONTROL_CONF_MII1_TX_EN (0x00000914)

#define CONTROL_CONF_MII1_RX_DV (0x00000918)

#define CONTROL_CONF_MII1_TXD3 (0x0000091C)

#define CONTROL_CONF_MII1_TXD2 (0x00000920)

#define CONTROL_CONF_MII1_TXD1 (0x00000924)

#define CONTROL_CONF_MII1_TXD0 (0x00000928)

#define CONTROL_CONF_MII1_TX_CLK (0x0000092C)

#define CONTROL_CONF_MII1_RX_CLK (0x00000930)

#define CONTROL_CONF_MII1_RXD3 (0x00000934)

#define CONTROL_CONF_MII1_RXD2 (0x00000938)

#define CONTROL_CONF_MII1_RXD1 (0x0000093C)

#define CONTROL_CONF_MII1_RXD0 (0x00000940)

#define CONTROL_CONF_RMII1_REF_CLK (0x00000944)

#define CONTROL_CONF_MDIO (0x00000948)

#define CONTROL_CONF_MDC (0x0000094C)

#define CONTROL_CONF_SPI0_SCLK (0x00000950)

#define CONTROL_CONF_SPI0_D0 (0x00000954)

#define CONTROL_CONF_SPI0_D1 (0x00000958)

#define CONTROL_CONF_SPI0_CS0 (0x0000095C)

#define CONTROL_CONF_SPI0_CS1 (0x00000960)

#define CONTROL_CONF_ECAP0_IN_PWM0_OUT (0x00000964)

#define CONTROL_CONF_UART0_CTSN (0x00000968)

#define CONTROL_CONF_UART0_RTSN (0x0000096C)

#define CONTROL_CONF_UART0_RXD (0x00000970)

#define CONTROL_CONF_UART0_TXD (0x00000974)

#define CONTROL_CONF_UART1_CTSN (0x00000978)

#define CONTROL_CONF_UART1_RTSN (0x0000097C)

#define CONTROL_CONF_UART1_RXD (0x00000980)

#define CONTROL_CONF_UART1_TXD (0x00000984)

#define CONTROL_CONF_I2C0_SDA (0x00000988)

#define CONTROL_CONF_I2C0_SCL (0x0000098C)

#define CONTROL_CONF_MCASP0_ACLKX (0x00000990)

#define CONTROL_CONF_MCASP0_FSX (0x00000994)

#define CONTROL_CONF_MCASP0_AXR0 (0x00000998)

#define CONTROL_CONF_MCASP0_AHCLKR (0x0000099C)

#define CONTROL_CONF_MCASP0_ACLKR (0x000009A0)

#define CONTROL_CONF_MCASP0_FSR (0x000009A4)

#define CONTROL_CONF_MCASP0_AXR1 (0x000009A8)

#define CONTROL_CONF_MCASP0_AHCLKX (0x000009AC)

#define CONTROL_CONF_XDMA_EVENT_INTR0 (0x000009B0)

#define CONTROL_CONF_XDMA_EVENT_INTR1 (0x000009B4)

#define CONTROL_CONF_WARMRSTN (0x000009B8)

#define CONTROL_CONF_NNMI (0x000009C0)

#define CONTROL_CONF_TMS (0x000009D0)

#define CONTROL_CONF_TDI (0x000009D4)

#define CONTROL_CONF_TDO (0x000009D8)

#define CONTROL_CONF_TCK (0x000009DC)

#define CONTROL_CONF_TRSTN (0x000009E0)

#define CONTROL_CONF_EMU0 (0x000009E4)

#define CONTROL_CONF_EMU1 (0x000009E8)

#define CONTROL_CONF_RTC_PWRONRSTN (0x000009F8)

#define CONTROL_CONF_PMIC_POWER_EN (0x000009FC)

#define CONTROL_CONF_EXT_WAKEUP (0x00000A00)

#define CONTROL_CONF_RTC_KALDO_ENN (0x00000A04)

#define CONTROL_CONF_USB0_DRVVBUS (0x00000A1C)

#define CONTROL_CONF_USB1_DRVVBUS (0x00000A34)

#define CONTROL_CONF_SLEWCTRL (1<<6)

#define CONTROL_CONF_RXACTIVE (1<<5)

#define CONTROL_CONF_PUTYPESEL (1<<4)

#define CONTROL_CONF_PUDEN (1<<3)

#define CONTROL_CONF_MUXMODE(X) (X&0x7)

#endif /* __MINIX_PADCONF_H */